Processor; Removing The Processor - Dell Vostro 200 Owner's Manual

Processor

CAUTION:
safety instructions located in the Product Information Guide.

Removing the Processor

1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
CAUTION:
hot during normal operation. Be sure that it has had sufficient time to cool before
you touch it.
3 Remove the processor fan/heat sink assembly from the computer (see
"Removing the Processor Fan/Heat Sink Assembly" on page 150).
NOTICE:
original heat sink fan assembly when you replace the processor.
4 At the processor, place your finger upon the hook end of the release lever,
then push down and out to release it from the tab that secures it.
152
Removing and Installing Parts
Before you begin any of the procedures in this section, follow the
Despite having a plastic shield, the heat sink assembly may be very
Unless a new heatsink is required for the new processor, reuse the