Dell Vostro 200 Owner's Manual page 16

1 location of Service Tag
2 eject button for optical
drive
3 FlexBay open/close
optical drive
4
5 FlexBay drive
6 power button
7 power light
8 USB 2.0 connectors (2)
9 microphone connector
10 headphone connector
11 drive activity light
16
Setting Up and Using Your Computer
Use the Service Tag to identify your computer
when you access the Dell Support website or call
technical support.
Press here to open or close the optical drive.
Press here to open or close the floppy/media card
reader panel
Can contain an optional optical drive.
Can contain an optional floppy drive or optional
Media Card Reader. For information on using the
Media Card Reader, see "Media Card Reader" on
page 136.
Press the power button to turn on the computer.
NOTICE:
To avoid losing data, do not use the
power button to turn off the computer. Instead,
perform an operating system shutdown.
The light in the center of this button indicates
power state.
Use the front USB connectors for devices that you
connect occasionally, such as joysticks or cameras,
or for bootable USB devices (see "System Setup
Options" on page 172 for more information on
booting to a USB device).
It is recommended that you use the back USB
connectors for devices that typically remain
connected, such as printers and keyboards.
Use the microphone connector to attach a personal
computer microphone for voice or musical input
into a sound or telephony program.
On computers with a sound card, the microphone
connector is on the card.
Use the headphone connector to attach
headphones and most kinds of speakers.
The drive activity light is on when the computer
reads data from or writes data to the hard drive.
The light might also be on when a device such as a
CD player is operating.