Floppy Drive - Dell Vostro 200 Owner's Manual

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 133.
Removing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3 Remove the bezel (see "Removing the Bezel" on page 122).
4 Remove the optical drive (see "Removing an Optical Drive" on page 140).
5 Disconnect the power and data cables from the back of the floppy drive.
6 Disconnect the data cable from the system board.
1
1 floppy drive
2
2 spring clamps (2)
Removing and Installing Parts
131