Table of Contents
Advertisement
5.1.14 VLAN
The page includes the following fields:
Object
VLAN Setup
Management VLAN ID
Enable Management
VLAN ID
VLAN ID
Figure 5-5-11
Description
Check this box to enable the VLAN function.
Configure a specified VLAN to be the management VLAN.
Check this box to enable the Management VLAN function.
The ID of a VLAN. Only in the same VLAN can a wireless PC and a
wired PC communicate with each other. The value can be between 1
and 4095. If the VLAN function is enabled, when AP forwards
packets, the packets out from the LAN port will be added with an
IEEE 802.1Q VLAN Tag, whose VLAN ID is just the ID of the VLAN
where the sender belongs.
-62-
User Manual of WNAP-7350
Advertisement
Table of Contents
