CVA610 Coffee System
5.28
Brew Unit – Lubrication
1. Remove the Brew Unit.
Note
2. Refer to figure 5-24 below; lubricate the following:
A: joints
B: axel
C: tracks
D: gasket
3. Refer to figure 25 below; lubricate the following:
E: bolt assembly
F: joints
4. Re-Install the Brew Unit into the appliance.
Check that the brew unit is in the basic position with the
funnel slightly lifted and the socket in vertical position.
Ensure the correct lubricant (Miele P/N 5132001) is used
for this procedure. Lubricant is available through the Miele
Technical Support Center at: 1-800-999-1360.
Figure 5-24: Brew unit lubrication points
Figure5-25: Brew unit lubrication points
65
Technical Information