Hot Water Nozzle - Removal - Miele CVA610 Technical Information

CVA610 Coffee System
5.19 Hot Water Nozzle – Removal
Refer to figure 5-18.
1. Open the door.
2. Remove the Rear Door Panel and Fascia Panel Cover
(5.12 & 5.13).
3. Loosen the nut (Item 2).
4. Remove the holder (Item 5).
5. Unscrew the sleeve, (Item 1) from the connector (Fig. 6).
6. Pull out the hot water nozzle (Item 3), from the connector.
1 Sleeve
2 Nut
3 Hot water nozzle
4 Fixing screws - Holder
5 Holder
6 Connector
7 Hot water valve (Y12)
Figure 5-18: Hot Water Valve Components
57
Technical Information