Waterpath Leakage Test - Miele CVA610 Technical Information

CVA610 Coffee System
5.47 Water Path Leakage Test
Should water be present in bottom of the appliance (i.e.
Watersystem Fault); or a leak is suspected the following procedure
can be used to locate the source of the leak.
Caution
The Heaters are hot during this test, and hot water under
pressure could leak from the system.
1. Fill the Water Tank
2. Place the appliance into the Service Mode
3. Quickly turn the selector knob to the "Programming" position
4. Press and hold all three coffee buttons - check for signs of leakage
(dripping, squirting etc...) hold buttons as long as necessary.
5. Release the three coffee buttons to end the test
85
Technical Information