Operating Electrical Adjustments; Selecting The Desired Adjustment Option - Sunrise Medical Omni User Manual

24

Operating electrical adjustments

4 Operating electrical
adjustments
Not every wheelchair has been equipped with
electronic adjustment options. We make a
distinction between four different adjustment
options to the seating system (fi gure 6):
• Tilt adjustments
• High/low adjustments
• Backrest adjustments
• Legrest adjustments
Note!
If you adjust the seat height by using the
high/low option or use the electrical tilt
adjustment 0 - 45°, the speed will be reduced
for your safety.
4.1 Selecting the desired
adjustment option
1. Switch on the controller
2. Press the 'mode' button of the Omni
interface (D fi gure 2) to select the
'adjustement options' mode. It is possible to
follow the status on the display screen.
To select and operate the electronic adjustment
options the external input device should be
used (fi gure 7). Functionallity of the input device
depends on the programming of the Omni. In
general:
3. Move the joystick to the left or the right to
select the desired adjustment option (1 + 2).
The selected adjustment option will be visible on the display screen.
4. Moving the joystick forwards and/or backwards to activate and control the selected electronic
adjustment option (3 + 4). Move the joystick forwards/backwards until the desired adjustment
option has been attained.
Tilt adjustment
High/low adjustments
Backrest adjustments
Legrest adjustments
5. Press the 'mode' button to return to the 'drive' mode.
Move joystick backwards
The entire chair will tilt backwards
The entire chair will be raised
The backrest will tilt backwards
The legrest angle will increase,
the footplate will be raised
1
Move joystick forwards
The entire chair will tilt forwards
The entire chair will be lowered
The backrest will tilt forwards
The legrest angle will decrease,
the footplate will be lowered
Omni
6
7
3
2
4