›
Unscrew the defective bulb in its housing in an anti-clockwise direction and
remove it.
›
Place a new bulb in the housing and turn it in a clockwise direction as far as
it will go.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow
.
2
›
Screw the housing in the opposite direction to arrow
place.
Replacing the bulb for the fog light
Fig. 144 Removing the wheel house trim
Fig. 145 Changing a bulb
Read and observe
and
Removing the wheel house trim
›
Use the on board tool to remove screws
›
Using a flat, blunt object, e.g. a coin, turn the part of the expansion rivet with
a slit 90 degrees in the direction of arrow
140
Do-it-yourself
until it clicks into
1
on page 138 first.
» Fig. 144
from the wheel well.
A
.
1
›
Pull out the part of the expansion rivet with a slit in the direction of arrow
.
2
›
Take out the expansion rivet in the direction of the arrow
Changing a bulb
›
Open out the wheel house trim in the direction of arrow
›
Press in the locking for the connector in the direction of arrow
›
Remove the connector in the direction of the arrow
›
Screw the lamp connector in the direction of the arrow
›
Remove the lamp connector in the direction of the arrow
›
Place a new connector with the bulb in the headlamp and turn it in the direc-
tion of arrow
as far as the stop.
7
›
Attach the connector until it clicks firmly into place.
Fitting the wheel house trim
›
Fold the wheel house trim back.
›
Push the expansion rivet back in.
›
Push in the part of the expansion rivet with a slit
the opposite direction to arrow
›
Firmly tighten the two attachment bolts
Replacing the bulb for the licence plate light
Fig. 146 Removing the licence plate lamp
Read and observe
and
›
Insert a slotted screwdriver into the slot in area
lamp in the direction of arrow
›
Remove the lamp from the bumper.
›
Unscrew the lamp in the direction of arrow
of arrow
.
3
›
Remove the faulty bulb from the housing.
.
3
» Fig. 145
4
.
6
as far as the stop.
7
.
8
and turn it 90 degrees in
2
» Fig. 144
.
1
with the screwdriver.
A
on page 138 first.
» Fig. 146
and free up the
A
.
1
and remove it in the direction
2
.
.
5