Bulb arrangement
» Fig. 140
Flashing
A
Low beam and high beam
B
Daytime running and parking light
C
Changing the low beam and high beam bulb (halogen headlights)
Fig. 141 Replacing the bulb for low beam and main beam
Read and observe
and
›
Remove the connector from the bulb in the direction of arrow
›
Remove the protective cap
.
A
›
Press the safety catch in the direction of the headlamp and then unhook in
the direction of arrow
» Fig. 141
2
›
Open out the safety catch in the direction of arrow
›
Remove the light bulb in the direction of arrow
in such a way that the fixing lugs of the light bulb socket fit into the recesses
of the lamp.
Installation is carried out in the reverse order.
on page 138 first.
1
.
.
3
and insert a new light bulb
4
Replacing bulb for daytime running lights and parking lights
Read and observe
›
Turn the housing containing the bulb
stop in the direction of the arrow
›
Remove the housing containing the bulb in the direction of arrow
›
Remove the faulty bulb from the housing.
›
Insert a new bulb into the housing.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow
›
Screw the housing in the opposite direction to arrow
» Fig. 141
.
place.
Changing the front turn signal bulb
Read and observe
›
Turn the housing containing the bulb
stop in the direction of the arrow
›
Remove the housing containing the bulb in the direction of arrow
Fig. 142
Replacing the bulb for daytime
running lights and parking lights
and
on page 138 first.
» Fig. 140
on page 138 as far as the
C
» Fig. 142
.
1
.
2
1
Fig. 143
Changing the bulb for the front
turn signal light
and
on page 138 first.
» Fig. 140
on page 138 as far as the
A
» Fig. 143
.
1
Fuses and light bulbs
.
2
until it clicks into
.
2
139