Removing And Installing Components; Removing The Stand - Dell OptiPlex 7440 Owner's Manual

Removing and installing components

This section provides detailed information on how to remove or install the components from your
computer.

Removing the stand

1. Follow the procedures in Before Working Inside Your Computer
Computer.
2. Place the computer on a flat surface with the display side facing downwards.
3. Perform the following steps as shown in the illustration:
a. Press the tab on the cover to release the stand [1].
b. Lift the stand upwards [2].
4. Slide the stand and lift it away from the back cover.
8
Before Working Inside Your
2