Removing the processor fan
1.
Follow the procedure in
2.
Remove the:
a.
stand
b.
back cover
c.
system-board shield
d.
power-supply unit
e.
VESA mount bracket
3.
Perform the following steps as shown in the illustration:
a. Disconnect the processor-fan cable from the connector on the system board [1].
b. Remove the screws that secure the processor fan to the computer [2].
c. Lift the processor fan away from the computer [3].
Installing the processor fan
1.
Align the processor fan on the computer.
2.
Tighten the screws to secure the processor fan to the system board.
3.
Connect the processor-fan cable to the connector on the system board.
4.
Install the:
a.
VESA mount bracket
b.
power-supply unit
c.
system-board shield
d.
back cover
e.
stand
5.
Follow the procedure in
Removing the memory module
1.
Follow the procedure in
2.
Remove the:
24
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.