Installing the stand
1.
Align the stand and slide it on the back of the computer.
2.
Press the cover attached to the stand, until it snaps in.
3.
Follow the procedure in
Removing the Cable Cover
1.
Follow the procedures in
2.
Remove the stand.
3.
Perform the following steps as shown in the illustration:
a. Remove the screw that secures the cable cover [1].
b. Press the release latches that secure the cable cover to the computer [2].
c. Lift the cable cover and remove it away from the computer [3].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
9