Dell OptiPlex 7440 Owner's Manual page 47

Option
Table 12. Cloud Desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server Port
Client Address Method
Description
• BIOS recovery from hard drive
Follow the procedure to recover BIOS from hard drive.
1. Power on the system.
2. While the blue Dell logo is visible, press the < F2 > key to enter the
System Setup.
3. Press the < Num Lock > key, and verify that the Num Lock light is on.
4. Press the < Caps Lock > key, and verify that the Caps Lock light is on.
5. Press the < Scroll Lock > key, and verify that the Scroll Lock light is on.
6. Press the < Alt > + < F > keys at the same time. The system will beep
as the setup defaults are restored.
7. Press the < Alt > + < B > keys at the same time to restart the system.
The changes are automatically saved.
Description
This option specifies how the Cloud Desktop software will lookup the
server address. The options are:
• Static IP - Uses the static IP address
• DNS - Obtains several IP addresses using the Domain Name System
(DNS) protocol. This option is selected by default
NOTE: This option is relevant only when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
This option specifies the server name of the server.
NOTE: This option is relevant only when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop,
and when the server look up method is set to DNS.
This option specifies the primary static IP address of the Cloud Desktop
Server with which the client software communicates. The default Server IP
Address is 255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
This option specifies the primary IP port of the Cloud Desktop with which
the client software communicates. The default Server Port value is 06910.
NOTE: This option is relevant only when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
This option specifies how the client obtains its IP address. The options are:
• Static IP - Uses the static IP address
• DHCP - Obtains IP address using Dynamic Host Configuration
Protocol(DHCP). This option is selected by default.
NOTE: This option is relevant only when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
47