Getting To The Menu; Menu Screen Conventions - Lynx hilo User Manual

outputs are receiving audio from at least one source. Please note that the ADAT I/O will not be visible in the All I/O page. The
ADAT input meters may be seen in the Test Tone page.
3.3 Getting to the Menu Pages
The in the lower right corner of any Meters page will send you initially to the Home page. Thereafter this will send you to the
last Menu page that you accessed.
The bottom of the menu pages has five round buttons which allow you to navigate between menu pages.
The Meter button on the far left returns you to the active meter page. The four buttons on the right select menu pages, each with up to
8 functions.
These five buttons, when pressed, bring up the following pages:
Meters
Display
Information
Tools
Home
3.3.1

Menu Screen conventions:

When you engage a button, it "lights up", just as if you are pushing a button on a console. The last button touched or changed will
always light up when that Menu page is selected.
Most buttons have a dual purpose. First they display the control's current setting. Second by touching them, you can select a different
setting.
Immediately changes the screen to the last selected meter set.
Allows settings that customize the information and format of the LCD Screen.
Displays useful status about Hilo and its operation.
Scene/routing memory and other, well, tools.
Basic settings and routing.
Page 13