Leckey KIT User Instructions page 6

6.15 When the product is not in use, it
should be stored in a dry place that is not
subjected to extremes of temperature. The
safe operating temperature range of the
product is +5 to +40 degrees Celsius.
6.16 Always check the ratchet handles on
the push handle are tightened securely
before you move the seat unit.
6.17 Before using the seating system
always check that the interface handle
on the seat unit is fully engaged with the
chassis and the locking pin is engaged.
If the handle is not engaged properly, the
seat unit may come loose and could cause
serious injury to the user or carer.
KIT Seating System –
Crash Test
The KIT Seating System has been crash
tested and passed for use in vehicles.
It has been tested in its complete
configuration on a surrogate base with a
Leckey head support attached.
If the KIT Seating System is being used
in a vehicle, the following points must be
adhered to:
The KIT Seating System must be
positioned forward facing and used
with an Unwin Restraint System and a
Leckey head support, which should be
suitably positioned at all times during
transportation. The head support is
available as an optional accessory with
the KIT Seating System.
The KIT Seating System is crash tested
and meets the requirements of ISO 16840
part 4. The seat has also been tested and
meets the requirements of ISO 7176-19.
The crash tests were carried out using
a chest harness and Pelvic Cradle.
For further details please contact our
Customer Service Department.
Important
If you are using the KIT Seating System
on a wheelchair base, please refer to the
wheelchair manufacturer's handbook for
crash test details.