Leckey KIT User Instructions page 14

7.9 Standard and
Complex Thoracic
Laterals
The standard and complex (horizontal and
vertical) laterals are attached in the same
way to the thoracic support. Before attaching
laterals, remove the thoracic cushion.
Before removing the bolt from the bracket
components, make a note of the order in
which the pieces fit together.
While holding the rest of the components
together, remove the bolt and washer (A)
with the Allen tool. Keeping the rest of the
components together, place the plastic
moulding into the slot (B). The bar should go
into the recess of the thoracic support. Insert
the bolt from the back and tighten. Fit the
lateral covers.
A
B
B