Leckey KIT User Instructions page 23

7.23 Interfaces for
wheelchair bases
The set up and attachment of the KIT
seat to any mobility base should be
completed by a technically competent
person who is familiar with the set up of
the mobility base.
The Leckey Mobility Base is built with an
interface which fits the KIT seat.
45cm Discovery Interface attachment to
18" (450mm) wide mobility base
The KIT seat can be easily attached to the
Discovery 45cm wide wheel base.
Please refer to specific assembly instructions
supplied with your interface for correct
positioning of your base. The interface
should be fitted by a qualified technician
who is technically competent in the set up
of the mobility base. The position of the
push handles, leg hangers and armrests on
the mobility base may need to be adjusted
depending on the size and weight of the user
to ensure the stability of the seat.
Leckey Mobility Base
Always refer to the mobility base
manufacturer's guidelines for correct set
up, paying particular attention to product
centre of gravity and stability.
A thorough risk assessment should be
carried out when attaching the KIT Seat to
any mobility base not supplied by Leckey.
45cm Discovery Base