Leckey KIT User Instructions page 28

8.6 Hip Laterals
The hip laterals can be width and angle
adjusted to suit the user's requirements.
Loosen the screws (A) at the back of the
sacral support. Move the hip laterals to
required position. Ideally the hip laterals
should always be rotated so they rest on top
of the seat cushion even if the backrest or
sacral support is angled. Once the hip laterals
are in position, retighten the screws securely.
A
A
B
C
The laterals can also be angled to
help support abduction, adduction or
windsweeping.
To adjust the angle of the hip laterals loosen
the screw (B) on the hinge of the hip lateral.
Adjust to the required angle. Retighten the
screw. The pads can also be adjusted in
depth and a small degree of rotation by
loosening the screws (C) on the pad, sliding it
to the required position and retightening the
screws.
B
C