Leckey KIT User Instructions page 29

8.7 Contoured Sacral
Support
The contoured sacral support can be
adjusted in a number of ways - height, depth
and angle.
To adjust the height or the depth, remove the
spine upholstery shroud and loosen the two
screws (A) on either side of the bracket. Move
the sacral support to the required position.
Retighten the screws and replace the spine
upholstery shroud.
To adjust the angle of the sacral support,
loosen both the screws (B) on the ball and
socket joint. Position the support at the
required angle. Retighten the screws.
A
The lateral supports can be angle adjusted
to contour the pad and provide lateral pelvic
support. To angle, loosen screw C, set to
required angle and retighten securely.
B
C
B
C