Leckey KIT User Instructions page 26

8.3 Pelvic Cradle
When setting up the Pelvic Cradle for the first
time with the client in it, the Pelvic Cradle
should be flat and open before the user is
placed into the Kit Seating System. All four
side and back buckles should be already
attached to the seat. When the client is placed
in the seat, first fasten the buckle (A) at the
front of the Pelvic Cradle. Then fasten the
Velcro (B) at the sides to fit the Pelvic Cradle
to the user. Then adjust the front and rear
straps (C) and (D) to secure to position the
user's pelvis.
After initial set up, only the front
buckle (A) needs to be released when
the user is transferred in or out of the KIT
Seating System.
Once a week, check that the Pelvic Cradle
has not become slack.
B
D
C
B
A
8.4 Gluteal ramp
If a gluteal ramp (A) is required, it can be
attached by Velcro to the front of the
Pelvic Cradle before the user is placed into
the seat.
A