HIKVISION DS-7108HI series User Manual page 92

Net dvr v2.1
Table of Contents

Advertisement

Step 2:
Then reboot the device and press any button in the pc keyboard again and again until the HIK
# come out in the Hyper Terminal interface, show as fig 6. then input the "print" to check if the IP
of the server and device is correct, also both of them should be in the same LAN. you can use the
command
"set serverip" to modified the server ip
"set ipaddr" to modified the device ip
"set netmask" to modified the mask ip
Show as the fig 7.
Fig 5
92

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-7204hi-vs series

Table of Contents