HIKVISION DS-7108HI series User Manual page 36

In the user name list box, only "admin" is existed. You can use【→】key,
move "Active Frame" to password edit box, and press【EDIT】key to enter into edit
status. Press numeric keys to input the new password. The password is only combined
by 16 numerals at most. After you finish inputting password, press【ENTER】key to
exit. Move "Active Frame" to "Verify password" edit box, input the verify password.
Move "Active Frame" to "Confirm" button, and press【ENTER】, if password and
verify password are the same, the password will be saved and taken into effective.
If password and verify password are not same, a warning message box will be
appeared. Shown as fig 5.3
In this case, press 【 ENTER】 to return password edit box, and input new password
again.
Fig 5.2 User management
Fig 5.3 Error
36