HIKVISION DS-7108HI series User Manual page 66

Step 2: Select delay time
The delay time is when the alarm is disappeared, the alarm output will continue output time.
The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes,
10 Minutes and Manual Stop. If you select "Manual' option, the alarm output will not stop until
you press "Clear Alarm" button in "Utilities" menu. So the actual alarm output time is made up of
alarm input time and this delay time.
Step 3: Enter into alarm out schedule
You can set the schedule to make alarm output into effective. Move "Active Frame" to
"Schedule" button on right side of "Alarm Out Time" item, press【ENTER】key to enter into the
corresponding schedule menu: Shown as fig 5.25
Step 4: Setup alarm out schedule
Like other schedule setup, you can set 4 time periods for one day and 7 days for one week.
When you finish setup, press "Confirm" button to return "Alarms" menu.
Step 5: Copy one alarm output parameters to other alarm output
In "Alarms" menu, you can copy parameters of current alarm output to other alarm output.
Step 6: Save setup
When you finish setup, in "Alarms" menu, press "Confirm" button to save all parameters.
Note: If any schedule is modified, you must reboot DVR to make it into effective.
Fig 5.25 Alarm out schedule
66