HIKVISION DS-7108HI series User Manual page 64

Step 4: Alarm trigger record channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
【ENTER】or【EDIT】key to enable record channel. "×" means disable and " means enable.
Note: In order to trigger the channel to record, in "Recording" menu, you must enable
recording and select record type as "Alarm" or other related
Step 5: Schedule for alarm handle method
When there is external alarm happened in the schedule, DVR will response according to the
handle methods.
Step 6: Alarm handle method
You can select one or more handle method: "On Screen Warning", "Audible Warning",
"Upload to Center" and "Trigger Alarm Output".
Description: If "On Screen Warning" is enabled, when there is external alarm happened and
DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one
camera, DVR will pop-up them one by one every 10 seconds. When the external alarm is
disappeared, DVR will restore preview mode.
Step 7: Save setup
In "Alarm in Handling" sub menu, press "Confirm" button and return "Alarms" menu. In
"Alarms" menu, press "Confirm" button to save the parameters.
Fig 5.23 Alarm in handling setup
64
type. Please refer to chapter 5.12.