Back connections
Connection example
LAN
RGB/PC
• Before connecting any external equipment, turn
off all main power switches.
• The unauthorized recording of TV programmes,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
• Additional equipment and cables shown are not
supplied with this TV.
• o 2 connection:
Use the A/V adaptor cable (supplied) (1-pin :
yellow/3-pins : yellow, white and red).
• o 3 connection:
Use the component adaptor cable (supplied)
1-pin : light green/3-pins : green, blue and red).
The audio terminals are shared with the o (2).
Selecting Side Shared Audio
You can select the Side Shared Audio external
input terminals located on the right side of TV o (2)
and o (3).
1
From AV Connection in the PREFERENCES
menu, press or select Side Shared Audio.
2
Press or to select EXT 2 or EXT 3.
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
Notes:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
OPTICAL input of a receiver or processor.
Connecting your TV
VCR (Normal)
DVD video player
(with component
video outputs)
or
Set Top Box
1(ARC)
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifi er's volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
• Turn off the amplifi er before you connect or
disconnect the TV's power cord. If you leave the
amplifi er power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set PCM
for Digital Output menu (- page 26). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifi er equipped with a Dolby
Digital decoder
Left side of TV
Front speaker
Surround speaker
Centre speaker
You can enjoy dynamic realistic sound by
connecting the TV to an amplifi er equipped with a
Dolby Digital decoder or Dolby Digital processor.
When using this setup, select Auto in the Digital
Output menu (- page 26).
Amplifier equipped with
Dolby Digital decoder
To Optical type
digital audio input
Optical digital cable
(not supplied)
To Digital Audio
output terminal
Sub woofer
Signal flow
41