Toshiba 55RZ1 Series Owner's Manual page 35

Setting the 3D Timer Lock
When the 3D Timer Lock feature is set to On,
neither the PIN input window nor the 3D start
message will be shown while the 3D Enable timer is
active, even if a switch to 3D Mode occurs. This helps
to avoid having to enter the 3D Lock PIN and view
the 3D start message every time when switching
to 3D.
1
From the 3D Safety Settings menu, press OK
and enter your 4-digit 3D PIN code.
2
Press  or  to select 3D Timer Lock and press
 or  to select On or Off .
Note:
The PIN input window appears when "continue" is
selected in the reminder dialogue for Enable 3D
Timer, even if 3D Timer Lock is activated.
Setting Enable 3D Timer
This feature helps to remind you not to watch 3D
video for extended periods of time. Once a set
period of time has passed, a dialogue will be shown
asking you if you wish to continue viewing in 3D or
not.
1
From the 3D Safety Settings menu, press OK
and enter your 4-digit 3D PIN code.
2
Press  or  to select Enable 3D Timer and
press  or  to select Off , 30, 60, 90 or 120
minutes.
Displaying the 3D Important Info
1
From the 3D Setup menu, press OK, and press
 or  to select 3D Important Info.
2
Press OK.
Adjusting 3D Depth
You can adjust the level of 3D.
From the Menu:
1
From the PREFERENCES menu, press  or  to
select 3D Setup and press OK.
2
Press  or  to select 3D Depth and press 
or  to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
eff ect.
Using the TV's features
From the Quick Menu:
1
Press QUICK. Select 3D Settings and press OK.
2
Press  or  to select 3D Depth and press 
or  to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
eff ect.
Notes:
• Adjustment is not available when the 3D Viewing
Mode is set to Single-viewer Mode and 3D
content is viewed in 3D mode.
• Depending on the content, setting the 3D eff ect
to a high level may result in blurring of the image
contours and background.
If you feel abnormality, fatigue or other
discomfort while watching 3D images, stop
watching and take a rest until the symptoms
disappear. Lower the settings to weaken 3D
eff ects when watching TV again so that it will
not be used in the range for you to have those
symptoms.
Switching left and right images
If 3D images look blurred, switch the left and right
sides of the 3D image.
1
Press QUICK . Select 3D Settings and press OK.
2
Press  or  to select Left and Right Image
and press  or  to select Swapped or
Normal.
35