Toshiba 55RZ1 Series Owner's Manual page 22

Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the Advanced Picture Settings menu,
press  or  to select Noise Reduction, and
then press OK.
Noise Reduction
Auto Clean
MPEG NR
DNR
2
Press  or  to select Auto Clean, and then
press  or  to select On or Off .
Off mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or Off
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or Off
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the Advanced Picture Settings
menu, press  or  to select 3D Colour
Management.
2
Press  or , then press  or  to select On.
3D Colour Management
3
Press  or  to select Base Colour
Adjustment.
4
Press OK, then press  or  to select an item
you want to adjust.
Base Colour Adjustment
Hue
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
5
Press , then press  or  to select Hue,
Saturation or Brightness.
6
Press  or  to adjust the settings as required.
Red
22
On
Auto
Auto
On
Saturation Brightness
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Hue Saturation Brightness
0 0 0
Using the TV's features
Note:
If you select colour management Off mode, this mode
is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
 or  to select Reset and press OK.
2
A confi rmation message will appear. Press  or
 to select Yes, and then press OK.
Using the LED Backlight Control
In order to improve screen visibility, the LED
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the Advanced Picture Settings menu,
press  or  to select LED Backlight Control.
2
Press  or  to select On or Off .
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it
will automatically optimise the backlighting levels
to suit ambient light conditions.
1
From the Advanced Picture Settings menu,
press  or  to select Auto Brightness Sensor
Settings and press OK.
2
Press  or  to select On and press OK.
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
3
Press  to select Backlight Adjustment Pro,
and then press OK.
4
The Backlight Adjustment Pro window will
appear.
Press OK again to display the adjustment
window.
5
Press  or  to select a point and press  or 
to adjust the level.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
Ambient Light
On
48
Cancel
Reset