Programming Channels Into The Tv's Channel Memory - Toshiba 55RZ1 Series Owner's Manual

Programming channels into the TV's channel
memory
• First, use the Auto Tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual Tuning function so that you can tune into
only desired channels.
• Use the Manual Tuning operation if desired
channels cannot be preset with the Auto Tuning
or if you would like to preset channels to specifi c
position numbers one by one.
Auto Tuning
1
From the SETUP menu, press  or  to select
Auto Tuning.
SETUP
Menu Language
Auto Tuning
Manual Tuning
Quick Setup
Location
Software Licences
System Information
Reset TV
2
Press OK to display the Auto Signal Booster
menu (- page 14), press  or  to select Yes
or No.
3
Press OK to display the Auto Tuning menu.
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
4
Press OK to start the automatic search.
The search will begin for all available stations.
Auto Tuning
Progress
1%
5
When the automatic search is completed, the
TV will automatically return to 1 position.
English
Antenna
Home
Start Scan
Found
Getting started
Manual Tuning
1
From the SETUP menu, press  or  to select
Manual Tuning.
2
Press OK to display the Manual Tuning menu.
Press  or  to select the programme position
you want to arrange.
Manual Tuning
Pos.
1
2
3
4
5
6
7
8
3
Press OK to display the breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
1
A
A. Position selection
B. System (Sound) (- page 63)
C. Colour System (- page 63)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is
abnormal, the automatic colour system
selection (A) may have malfunctioned, or
sound system selection is wrong. In such a
case, select another colour and/or sound
system (- page 63).
D. Position skip selection
Press  or  to turn the position skip
option on "8" or off "(".
The position will then be skipped when you
select channels with PU or Pu.
The "8" mark will appear when you use the
Number button on the remote control.
E. Signal Class selection (- page 62)
Press  or  to select C or S.
C: 1 ch - 12 ch, 21 ch - 69 ch
S: 1 ch - 41 ch, 51 ch - 55 ch
Channel
Label
C-02
C-04
C-05
C-07
C-09
C-12
S-17
S-19
B/G A C 2 0
C E F G
B D H
On
J
I
17