Software Installation; System Requirements; Installation; Installing Komplete Audio 6 On Windows 7 - Native Instruments Komplete Audio 6 Instruction Manual

3

Software Installation

In order for the KOMPLETE AUDIO 6 to work properly with your computer, the following two
programs are automatically installed on your system during the software installation process:
• The KOMPLETE AUDIO 6 driver. This handles the communication between the audio
interface and your computer.
• The Control Panel software. This allows you to adjust performance settings and control
sync and pre-amp settings for Windows (in Mac OS X, the relevant settings are con-
trolled from the system's Audio MIDI setup).
If you are familiar with the installation procedure and the general configuration of USB-
% !
driven audio devices on your computer, you can skip this chapter and continue with
registration chapter 3.3.

3.1 System Requirements

For latest system requirements, compatibility and support of the latest operating systems,
please visit our product page at: http://www.native-instruments.com/KA6

3.2 Installation

3.2.1 Installing KOMPLETE AUDIO 6 on Windows 7
! !
Do not connect the KOMPLETE AUDIO 6 to your computer before the software installa-
tion process is finished.
To install the KOMPLETE AUDIO 6 on Windows 7:
1.
Place the installation disc in your computer's CD/DVD-ROM drive.
2. Use Windows Explorer to browse the contents of the disc.
3. Double-click the installer file: "KOMPLETE AUDIO 6 Setup PC.exe."
8 – KOMPLETE AUDIO 6 – Manual