Native Instruments Komplete Audio 6 Instruction Manual page 32

Connection Monitor Section
6.8 The Connection Monitor section in the Diagnostics page of the Control Panel.
The section provides feedback on connected clients and USB data errors. It
Connection Monitor
has two displays and a button:
•
Number of Clients: displays the number of clients connected to the interface. Multiple
ASIO applications are counted separately. WDM and WASAPI increase the number by
one, no matter how many WDM / WASAPI applications play audio.
• USB Data Errors: counts USB data errors. Poor quality, or long USB cables as well as ir-
radiation can be the source of connection errors on the USB bus.
• Reset: A click on this button resets the error count.
System Performance Test Section
6.9 The System Performance Test
The System Performance
dure Call) latency value of your Windows system. A Deferred Procedure Call is a Windows
mechanism which allows high-priority tasks (such as the basic system tasks) to delay lower-
priority tasks. This specific DPC latency is not to be confused with the overall latency, ex-
plained in chapter 10.2, but it can add to it. The section has two displays and two buttons:
• Current Latency: displays the current DPC latency value.
•
Maximum Latency: displays the highest DPC latency value monitored since the last time
you either started or restarted monitoring.
• Reset: Press this button to reset the Maximum
• Start/Stop: Press this button to start monitoring DPC latency. Once started, the button
label changes to Stop.
section in the Diagnostics page of the Control Panel.
Test section provides monitoring of the current DPC (Deferred Proce-
Latency value to zero.
KOMPLETE AUDIO 6 – Manual – 31