Basic Configuration; Selecting The Komplete Audio 6 As Your System's Default Audio Output Device; Windows Xp; Windows Vista, Windows 7 - Native Instruments Komplete Audio 6 Instruction Manual

4 Basic Configuration
In order for the KOMPLETE AUDIO 6 to operate as your computer's default soundcard, you
will need to select it within the system's audio preferences. Find the relevant instructions
in chapter 4.1.
To use the KOMPLETE AUDIO 6 as your music software's default audio output, see the
information given in chapter 4.2.
4.1 Selecting the KOMPLETE AUDIO 6 as Your System's Default
Audio Output Device
In the following sections, you will learn how to set up the KOMPLETE AUDIO 6 as your sys-
tem's default audio output device.
4.1.1 Windows XP
1. Open Start > Control Panel > Hardware and Sound > Sound.
2. In the Sounds and Audio Devices
3. From the Default
4. Click OK to confirm your selection and close the window.
→ The KOMPLETE AUDIO 6 is now selected as the default audio output device.
4.1.2 Windows Vista, Windows 7
1. Open Start > Control Panel > Hardware and Sound > Sound.
2. In the Sound control panel, select the Playback tab.
3. Select the KOMPLETE AUDIO 6's pair of outputs (Ch A, Out 1|2 or Ch B, Out 3|4) that
you want to set as default by clicking the corresponding entry.
4. Click Set Default.
5. Click OK to confirm your selection and close the window.
→ KOMPLETE AUDIO 6 is now selected as the default audio output device.
20 – KOMPLETE AUDIO 6 – Manual
Properties window, select the Audio tab.
Device drop-down list, select one of the KOMPLETE AUDIO 6 entries.