HP ENVY Maintenance And Service Manual page 81

6. To remove the display/webcam cable, remove the cable from the clips built into the display enclosure
(1), and then remove the cable from the display enclosure (2).
The display cable is available using spare part number 812675-001 for HD and FHD displays and
812677-001 for QHD+ displays.
7. If replacing the display enclosure, be sure that the subcomponents (including the webcam/microphone
module, the antenna receivers, and all associated cables and hardware) are transferred to the new
enclosure.
The display enclosure is available using spare part number 812670-001 for HD and FHD models and
823126-001 for QHD+ models.
Reverse this procedure to install the display assembly.
Component replacement procedures 73