HP ENVY Maintenance And Service Manual page 73

The display raw panel is available using spare part number 812689-001 for HD panels, 812690-001 for
FHD panels, and 812691-001 for QHD+ panels. The raw panel kit includes touch panel, touch board,
bezel, rubber supports, display cable, webcam, and screws.
a. Remove the two screw covers (1) and two Phillips PM2.5×3.5 screws (2) that secure the display
rear cover to the display.
b. Work a plastic tool around the seam to separate the display rear cover from the display (3).
c. Remove the display rear cover (4).
d. Rotate the hinges open as far as possible.
e. Lift the display hinge covers off the display (1).
f. Note the routing of the antenna cables (2) and display cable (3) for reassembly.
2. To remove the webcam/microphone module:
The webcam is available using spare part number 812715-001.
a. Position the display assembly with the top edge toward you.
b. Lift the tape from atop the webcam (1).
Component replacement procedures 65