Hard Drive; Tb, 5400 Rpm, 9.5-Mm 801808-005; Tb, 5400 Rpm + 8 Gb Nand Hybrid, 9.5 Mm; Tb, 5400 Rpm, 9.5-Mm 778192-005 - HP ENVY Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable.
The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number
812686-001. The hard drive cable is available using spare part number 812697-001.
Description
2.0 TB, 5400 rpm, 9.5-mm

1.0 TB, 5400 rpm + 8 GB NAND hybrid, 9.5 mm

1.0 TB, 5400 rpm, 9.5-mm

750 GB, 5400 rpm, 9.5-mm (Best Buy SKUs)

500 GB, 5400 rpm, 7.0-mm
Hard Drive Hardware Kit (includes bracket and screws)
Hard drive cable
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
2. Remove the four Phillips PM2.5×3.0 screws (2) that secure the hard drive assembly to the computer.
3. Lift up on the hard drive tab (3) to remove the hard drive assembly from the hard drive bay.
Bottom cover on page
Battery on page 48).
31).
Component replacement procedures
Spare part number
801808-005
731999-005
778192-005
778190-005
778186-005
812686-001
812697-001
49