Rename A Device; Replace An Active Device; Bluetooth ® Connection From Idle Mode - VTech DS8121-2A User Manual

4.3.8

Rename a Device

You can change the name of a paired device on the paired devices list.
1. Press MENU on the handset when it is not in use.
2. Press or
3. Press or
4. Press or
5. Press or
ENTER NEW NAME.
6. Use the dialling keys to edit the name (page 18).
Press on the handset to erase a character.
Press and hold
Press or
7. Press SAVE. The handset displays Device renamed. You hear a confirmation tone.
note
Only the first 11 characters of the device name are shown on the device list.

4.3.9 Replace an Active Device

If you already have 2 active devices on the device list and you want to activate a
different device, you must deactivate one of the two active devices.
To replace an active device:
1. Press MENU on the handset when it is not in use.
2. Press or
3. Press or
4. Press or
prefix, then press OPTION.
5. Press or
Only 2 devices can be ready for connection and then a list of devices
for deactivation.
6. Press or
handset displays DEVICE A is deactivated and you hear a confirmation tone. The
screen then displays Connecting DEVICE B to the base...
7. Depending on your mobile phone settings, you may need to press a key on your
mobile phone to confirm the connection. When the new device is successfully
activated and connected, the handset displays Device connected. You hear a
confirmation tone.
4.3.10 BLUETOOTH
When you have active devices that are not connected, CONNECT appears on the idle
handset. Press CONNECT to start connecting an active device. when there are two
active devices, the handset will prompt you to choose one before connection.
to highlight Bluetooth, then press SELECT.
to highlight Device list, then press SELECT.
to highlight a device when necessary, then press OPTION.
to highlight Rename, then press SELECT. The screen displays
on the handset to erase all characters.
on the handset to move the cursor to the right or left.
to highlight Bluetooth, then press SELECT.
to highlight Device list, then press SELECT.
to highlight the device you want to activate, without a D1: or D2:
to highlight Connect, then press SELECT. The handset displays
to highlight the device to be deactivated, then press NEXT. The
®
connection from idle mode
24