Table of Contents
Advertisement
noteS
1.
If Off is selected, Power Fail Back-Up mode will not be enabled.
2.
If Auto is selected, the registered handset(s) will display Put in cradle to power
up BS when mains power interruption occurs. Place the handset with sufficient
battery power (not lower than level 2) onto the main base unit to activate Power
Fail Back-Up and start up the base. If handset is already on the main base unit
it will automatically activate the Power Fail Back-Up mode (if it has sufficient
battery power) and start up the base.
3.
If Manual is selected, the registered handset(s) will display To power up BS
press TALK OFF when mains power interruption occurs. Press
place the handset onto the main base unit to activate the Power Fail Back-Up
mode and start up the base.
4.
If a handset is already on the main base unit, just press
5.
Power Fail Back-Up mode will not work if the handset battery power is not
sufficient (not lower than level 2).
6.
Do not pick up the power supplying handset from base when Power Fail Back-Up
mode is activated.
7.
Do not touch the charging contacts of the power supplying handset during Power
Fail Back-Up mode.
8.
In Power Fail Back-Up mode, the answering machine and BLUETOOTH
cordless phone will not operate.
9.
It may take up to 90 seconds to transition through the Power Fail Back-Up
activation process as the base and handset(s) synchronise with each other.
5.26.2 Make a Call Using Power Fail Back-Up Mode
If there is only one handset registered to the base:
1. Once the handset is placed onto the main base unit, enter the telephone
number, and then press
automatically and call is made.
OR
1.
Lift up the handset and enter the telephone number
2.
Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made. Handset may
show Please wait... whilst the handset starts up the base before dialling.
3.
To end the call, press
If there is more than one handset registered to the base, the handset on the main
base unit should be left as a power supply of the base and you can use the other
handset(s) to make calls like normal.
note
The handset should always remain on the main base unit for the entire length of
the call.
or
. The speakerphone will be turned on
.
39
and then
.
®
of your
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DS8121-2A and is the answer not in the manual?
Questions and answers