Positioning - Smeg TRA4110P Instruction Manual

Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid use of adapters and shunts as these
could cause overheating and a risk of
burns.
Overall dimensions
Location of gas and electrical connection
points.
36
Installation

5.5 Positioning

• Place the appliance into the piece of
furniture with the aid of a second person.
• When positioning the appliance during
installation, do not use the door handle
to lift up or move this appliance.
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
• Veneers, adhesives or plastic coatings
on adjacent furniture should be
temperature-resistant (no less than
90°C).
Heavy appliance
Danger of crush injuries
Pressure on the open door
Risk of damages to the appliance
Heat production during appliance
operation
Risk of fire