Table of Contents
Advertisement
Quick Links
mode
We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com
PRECAUTIONS
General safety instructions
Risk of personal injury
• WARNING: During use the
appliance and its accessible
parts become very hot. Keep
children well away from the
appliance.
• Protect your hands by wearing
oven gloves when moving food
inside the oven.
• Never try to put out a fire or
flames with water: Turn off the
appliance and smother the
flames with a fire blanket or
91477B112/D
3
3
7
8
8
9
9
9
9
9
9
9
9
9
10
10
10
11
11
11
12
other appropriate cover.
• This appliance may only be
used by children aged 8 years
and over, and by people of
reduced physical, sensory or
mental capacity, or lacking in
experience in the use of
electrical appliances, provided
that they are supervised or
have been given instructions on
the safe use of the appliance
and of the hazards associated
with it.
• Children must not play with the
appliance.
12
12
13
13
13
14
16
17
18
18
18
19
19
20
21
22
23
24
26
26
30
31
PRECAUTIONS - 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Smeg TRA90GPGR
Summary of Contents for Smeg TRA90GPGR
-
Page 1: Table Of Contents
Accessories Instructions for the installer We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com PRECAUTIONS General safety instructions other appropriate cover. - Page 2 • Keep children under the age of off the appliance and smother eight at a safe distance unless the flames, for example with a they are constantly supervised. lid or a blanket. • Keep children under the age of • The appliance becomes very 8 away from the appliance hot during use.
- Page 3 THE STORAGE technician. COMPARTMENT (IF • If the power cable becomes AVAILABLE) OR NEAR THE damaged, contact technical APPLIANCE. support immediately to arrange • DO NOT USE AEROSOLS IN for it to be replaced in order to THE VICINITY OF THIS avoid possible hazards.
- Page 4 • Racks and trays should be separately, depending on the inserted as far as they will go model) by placing it on the into the side guides. The bottom as a support for mechanical safety locks that cooking. prevent them from being •...
-
Page 5: Installation
and burner caps in the the electric hot plates of the dishwasher. hob. • Never use the oven door to • During the first pyrolytic cycle, lever the appliance into place unpleasant odours may occur when fitting. due to the normal evaporation •... -
Page 6: Appliance Purpose
installation regulations. Pay connected to earth in particular attention to the compliance with electrical requirements regarding system safety standards. ventilation. • Use cables that can withstand • The settings for this appliance temperatures of at least 90°C. are shown on the gas setting •... -
Page 7: Manufacturer's Liability
• Take the packing materials to appropriate Technical data on the appliance's power selective collection centres. consumption in off/stand-by mode can be found at www.smeg.com under the page Plastic packaging corresponding to the product in question. Danger of suffocation Information on power consumption in •... -
Page 8: How To Read The User Manual
light sources. • This appliance contains light sources of efficiency class "G". How to read the user manual This user manual uses the following reading conventions: Warning/Caution • The light sources contained in the appliance are declared suitable for operation at ambient temperature ≥300°C and intended Information/Advice for use in high temperature applications such... -
Page 9: Hob
AUX = Auxiliary Burner UR2 int = Internal Ultra Rapid Burner SR = Semi-rapid Burner UR2 ext = External Ultra Rapid Burner R = Rapid Burner Control panel 1 Function knob programmed cooking operations and the minute minder timer. The oven’s various functions are suitable for different cooking methods. -
Page 10: Accessories
the rack above. been turned off. Tray rack Do not obstruct ventilation openings and heat dispersal slots. Interior lighting The appliance’s interior lighting comes on: • When the door is opened. • When any function is selected, apart from function. Useful for supporting containers with food When the door is open, it is not possible during cooking. -
Page 11: Using The Accessories
Using the accessories Wait a few moments and repeat the operation. Keep the knob pressed in longer. Racks and trays In case of an accidental switching off, a Racks and trays have to be inserted into the side safety device will be tripped, cutting off guides until they come to a complete stop. -
Page 12: Digital Programmer
2. Select the temperature using the CIRCULAIRE The heat is distributed quickly and temperature knob. uniformly. Suitable for all dishes, ideal Ensure that the programmer clock for cooking on multiple levels without shows the cooking duration symbol mixing smells or flavours. , otherwise it will not be possible to turn on the oven. - Page 13 6. Press the buttons at the same Ensure that the programmer clock time to reset the programmer clock. shows the cooking duration symbol , otherwise it will not be possible to It is not possible to set a cooking time of turn on the oven.
-
Page 14: Cooking Advice
Minute minder timer • Use a meat thermometer when roasting meat, or simply press on the roast with a The minute minder timer does not stop spoon. If it is hard, it is ready; if not, it needs the cooking operation but rather informs to be cooked for a few more minutes. -
Page 15: Cooking Information Table
Advice for defrosting and proving this way, the liquid from the defrosting food drains away from the food. • Place frozen foods without their packaging in a lidless container on the first shelf of the • The most delicate parts can be covered with oven. -
Page 16: Cleaning And Maintenance
Weight Temp. Time Food Function Shelf (Kg) (°C) (minutes) Tart CIRCULAIRE 35 - 40 Ricotta cake CIRCULAIRE 160 - 170 55 - 60 Jam tarts TURBO/CIRCULAIRE 20 - 25 Paradise CIRCULAIRE 55 - 60 cake Profiteroles TURBO/CIRCULAIRE 80 - 90 Sponge CIRCULAIRE 150 - 160... -
Page 17: Knobs
residues with a wooden toothpick or a needle. 2. Grasp the door on both sides with both hands, lift it so that it forms an angle of around 30° and remove it. 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure Knobs that grooved sections A are resting... -
Page 18: Cleaning The Oven Cavity
4. Remove the intermediate glass pane by down. lifting it upwards. Avoid letting food residue dry inside the oven cavity, as this could damage the enamel. Take out all removable parts before cleaning. For easier cleaning, it is recommended to remove: •... -
Page 19: Pyrolytic Function (On Some Models Only)
Removing self-cleaning panels and rack/tray the warnings on the product); leave for 60 support frames (on some models only) minutes, then rinse and dry the glass using kitchen roll or a microfibre cloth. Removing the side self-cleaning panels and the rack/tray support frames enables the sides to •... -
Page 20: Extraordinary Maintenance
lock lever might be inadvertently operated. shows the current time and the indicator light comes on. 2. Turn the temperature knob to set the time at which you wish to complete the pyrolytic cycle. 3. After a few seconds, the indicator lights remain on steadily and the appliance waits for the set start time to start the cleaning cycle. -
Page 21: Installation
Replacing the internal light bulb 4. Slide out and remove the light bulb. Power voltage Danger of electrocution • Unplug the appliance. • Wear protective gloves. 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames. 3. -
Page 22: Gas Connection
1000mm), must not be in contact Patent 2015101170. For enquires contact with the floor or any hot surface or sharp Gas Approval Consulting Pty Ltd Smeg licence 037 for GSCS20265 surface. The hose assembly must not be subject to strain, abrasion, kinking, deformation, contact with any other appliance or accidental contact with oven flue outlet of an under bench oven. - Page 23 Connection to LPG Replacing nozzles Use a pressure regulator and make the connection on the gas cylinder following the guidelines set out in the standards in force. The supply pressure must comply with the values indicated in the “Burner and nozzle characteristics table”.
-
Page 24: Burner And Nozzle Characteristics Tables
position. Extract the gas cock knob and turn the Adjusting the minimum setting for natural gas adjustment screw next to the gas cock spindle (depending on the model) until the correct minimum flame is achieved. Refit the knob and verify that the burner flame is stable. - Page 25 Appliance dimensions The supply connection point must be accessible with the appliance installed. If a hood is installed above the appliance, refer to the hood instructions manual to make sure the correct clearance is left. Appliance overall dimensions Position of electrical connection Levelling the appliance See General safety instructions.
- Page 26 Assembling the upstand 3. Fasten the front skirting to the appliance using the previously removed screws. Installing the side plinth After installing the front skirting, the side skirting can be fastened correctly to the appliance. 1. Use a screwdriver to remove the front screws underneath the storage compartment.
- Page 27 Fastening to the wall 5. Align the base of the fastening bracket with the ground and tighten the screws to fix the measurements. The symbols above indicate the danger if the anti-tip are not installed devices and the importance of their correct installation. The anti-tip devices must be installed in order to prevent the appliance from tipping over.
-
Page 28: Electrical Connection
9. Push the cooker towards the wall, and at the 3. Stretch the chain out horizontally so that the same time insert the bracket in the plate other end touches the wall. Mark the fastened to the rear of the appliance. position for the hole on the wall. -
Page 29: Instructions For The Installer
3. Proceed with installation of the power The appliance can work in the following modes: supply cable. 220-240 V 1N 3 x 1.5 mm ² three-core cable The values indicated refer to the cross- section of the internal conductor. The aforementioned power cables are sized taking into account the coincidence factor (in compliance with standard EN 60335-2-6). - Page 30 contact your local Authorised Service Centre. • Once the appliance has been installed, please explain to the user how to use it correctly. 32 - INSTALLATION 91477B112/D...
Need help?
Do you have a question about the TRA90GPGR and is the answer not in the manual?
Questions and answers