Table of Contents
Advertisement
3. Press the lid release trigger Part.1.
4. Grip the top of the filter and pull it up out of its grooves. Part. 2.
5. Either brush it lightly with a soft brush, under running water or when descaling
your kettle, drop the filter in too. Rinse thoroughly before use.
6. Rinse the kettle; in case of any scale, particles have fallen inside.
7. To replace, simply slide the filter back down the grooves on either side of the
spout, inside the kettle. Part. 3.
8. Close the lid. Fill with water and resume regular use.
PROBLEM SOLVING
If the kettle switches OFF before it has boiled:
Generally caused by scale build up inside, and can be resolved by descaling.
Alternately, the kettle may have accidentally been used without water or
insufficient water, causing the safety cut-out device to operate. Reset as
explained below.
Re-setting the boil dry safety cut-out:
Wait 5 minutes for the kettle to cool, and then refill with cool water.
Push the ON/OFF switch, and after about 25 minutes the kettle will automatically
re-set itself, and start to boil.
If the kettle does not work:
Check the power supply is switched ON at the wall socket.
9
Advertisement
Table of Contents
