Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Russell Hobbs 14387
Summary of Contents for Russell Hobbs 14387
- Page 1 instructions...
-
Page 3: Important Safeguards
Read the instructions and keep them safe. Pass them on if you pass the kettle on. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: caution In common with many other water filter cartridges, this one releases generally harmless, low levels of potassium, and trace levels of silver. - Page 4 hot or cold? You can use the filter to filter water for cold drinks too. You don’t need to buy a water filter jug, use the kettle – just don’t switch it on. , Don’t put the kettle in the fridge – transfer the water to a fridge-proof container. before using the kettle for first time.
- Page 5 fit the new filter 21 Align the tabs on the top of the filter with the bulges underneath the reservoir. 22 Push the filter gently up, against the seal, and turn it anti-clockwise (about 1.5cm) to lock it into the reservoir. 23 Slide the release button towards the handle, and hold it there.
- Page 6 everyday use 38 Put the stand on a stable, level surface. 39 Route the cable so it doesn’t overhang, and can’t be caught or tripped over. fill the reservoir 40 Remove the kettle from the stand. caution keep clear, if it has recently boiled, steam may escape from the lid segments 41 Slide the fill button towards the kettle, to open the lid segments, and hold it there.
-
Page 7: Troubleshooting
descale regularly – even in soft water areas 8 The water filter will help to reduce limescale and phosphate scale in your kettle. But you should still check the kettle frequently for signs of scale, even in soft water areas. 9 Limescale may be white, coloured, even rusty-looking, but it’s normally visible. - Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.
Need help?
Do you have a question about the 14387 and is the answer not in the manual?
Questions and answers