Russell Hobbs 15082 Instructions Manual

Russell Hobbs 15082 Instructions Manual

Illuminating glass kettle

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Summary of Contents for Russell Hobbs 15082

  • Page 1 instructions...
  • Page 3: Positioning/Filling

    Read the instructions and keep them safe. Pass them on if you pass the kettle on. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: 1 The kettle must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
  • Page 4: Switching Off

    switching on 10 Put the kettle on the stand – take care not to spill. 11 Plug the stand into a power socket (switch the socket on, if it’s switchable). 12 Move the switch to 1 – the lights round the floor of the kettle will glow, and the kettle will heat up.
  • Page 5: Water Filter

    water filter 12 Scale particles suspended in the water may give it a cloudy or greasy appearance. The filter will prevent these particles going into your drink. If you see deposits on the filter, clean it, otherwise the performance of your kettle will drop, your drinks may contain scale, and the water inside the kettle may look cloudy.
  • Page 8: Connection

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents