3.
Remove the system board from the chassis by disengaging the USB connectors from the slots on the
front wall of the chassis.
4.
Ensure that the I/O connector cover is still in place on the I/O connector at the back of the system
board.
Figure 36. Removing and installing the system board
1.
hex nut screw (4)
3.
screw (10)
Next steps
1.
Install the system board. See
2.
Follow the procedure listed in
Related Links
Removing a processor
Removing memory modules
Removing the cooling shroud
Installing the system
board.
After working inside your
2.
system board
4.
system board handle
system.
89