Manual Configuration - AudioCodes 320HD Setup Manual

1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on "Quick Setup" section of the AudioCodes Phone
WebUI:
SIP Proxy and Registrar

Use SIP Proxy: Enable

Proxy IP Address or Hostname: Elastix Server's IP Address (192.168.5.186
in this example)

Proxy Port: 5060

Use SIP Proxy IP and Port for Registration: Enable
Line Settings

Line Activate: Enable

User ID: (301 in this example)

Authentication User Name: (301 in this example)

Authentication Password: ('h7Dka3Rf9si0t' in this example)
Figure 4-8. Account Configuration
2. Once you have entered the required information, click on 'Submit' button located at
the end of the page. If the phone is not able to register, make sure you've entered the
correct information.
3. Configure the other IP (SIP) Phone with the correct parameters.
4. To test the AudioCodes 320HD, pick up the previously configured IP (SIP) Phone
and call the AudioCodes 320HD's extension number (301 in this example). When the
call is established, speak into the phone and verify that the other IP (SIP) Phone can
hear your voice. Check this by calling from both ends. This step completes the
procedure.
AudioCodes 320HD Server Setup Guide

MANUAL CONFIGURATION

7
PaloSanto Solutions