AudioCodes 320HD Setup Manual page 5

Figure 4-5. Apply Configuration Changes Here
9. With this you have just finished creating a SIP extension that will be used by the
AudioCodes 320HD to register with the Elastix Server. Repeat Steps 5 through 8 to
similarly create another extension (different values on Step 6) to be used by the IP (SIP)
Phone to register as well (extension 302 in this example). Once finished you will see
something similar to Figure 4-6
Figure 4-6. AudioCodes and IP Phone extensions successfully created
10. You will need to enter the information from the extension created on the Elastix
Server into the AudioCodes Phone for registration.
For the initial configuration, refer to the AudioCodes 320HD Administration Guide
which can be found at:
www.audiocodes.com/filehandler.ashx?fileid=1280794
IP Addressing
Web Access User Name admin
Web Access Password
11. Log in to the AudioCodes 320HD WebUI by pointing your browser to the
AudioCodes Phone's IP address.
12. When prompted, enter the Web Access Username and Web Access Password to
access the AudioCodes WebUI (Figure 4-7).
AudioCodes 320HD Server Setup Guide
Factory default settings
DHCP
1234
5
PaloSanto Solutions