Download Print this page

AudioCodes 320HD Setup Manual page 10

And elastix server

Hide thumbs Also See for 320HD:

6. Click the "Set" button. When the process finish loading, reboot the phone by

unplugging and plugging again the power cord. The phone should be registered and

ready for calls after initialization.

7. Configure the other IP (SIP) Phone with the correct parameters.

8. To test the AudioCodes 320HD, pick up the previously configured IP (SIP) Phone

and call the AudioCodes 320HD's extension number (301 in this example). When

the call is established, speak into the phone and verify that the other IP (SIP) Phone

can hear your voice. Check this by calling from both ends.

AudioCodes 320HD Server Setup Guide

PaloSanto Solutions

Table of Contents