Bluetooth Mode; Nfc (Near Field Communication) - Bush Heritage 2 User Manual

Bluetooth Mode

Pair the unit with a Bluetooth device to listen to music:
1. Press the MODE button to select Bluetooth mode.
2. The display will flash in
3. Activate your Bluetooth device and select the search mode.
4. 'Heritage II' will appear on your Bluetooth device.
5. Select 'Heritage II' and enter "0000" for the password if necessary.
6. The icon will remains steadily on the display when connection is successful.
7. While a track is playing, you can:
a. Press button once to resume to the beginning of track, and then press
once again to skip to previous track; press and hold
playing track.
b. Press button to pause or play current playing track.
c. Press button to skip to next track; press and hold
playing track.
8. To disconnect the Bluetooth connection, press MENU button on the unit, turn
SELECT/SNOOZE knob to select 'BT disconnect', and then press SELECT/SNOOZE knob
to confirm. The display will show 'Device disconnect?', turn SELECT/SNOOZE knob to
select 'YES', and then press SELECT/SNOOZE knob to confirm.
Note: the unit will automatically switch to standby mode after 10 minutes if the source device
is disconnect, switched off or the volume is too close to mute.

NFC (Near Field Communication)

NFC enable you pair and connect with Bluetooth devices in an easy way.
1. Press MODE button repeatedly to select Bluetooth mode.
2. Make sure that your NFC is turned "On" on your mobile device.
3. Hold your mobile device about 2cm close to NFC sensor on front panel for receiving an
auto-connection between your mobile device and radio.
4. Your device then will turn-on Bluetooth automatically and will pair your device with radio. No
additional settings are necessary.
28
repeatedly.
button to fast reverse current
button to fast forward current
button