Table of Contents
Advertisement
Using your Outdoor DAB Radio
Let's get started
Bluetooth mode
Check that your Radio is in Bluetooth mode. If you are not already in Bluetooth mode,
press and release the Mode button until you are in Bluetooth mode (check the display).
'Searching...' will flash in the display.
Connect to a Bluetooth device
In Bluetooth (BT) Mode:
1. 'Searching...' will flash in the display.
2. On the device that you would like to connect to your Radio via Bluetooth (e.g. iPhone/
iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is 'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device' , if necessary.
Note: Some products will automatically search for a new device and so the 'Add new
device' option is not available.
4. When found, your Radio will be displayed as 'BUSH OUTDOOR' . Select the device
name to begin pairing.
5. When pairing is complete 'Search...' will stop flashing in the display, Connected will be
displayed and a short tone will sound.
6. Now that you have paired your device with the Radio, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the Radio unless you decide to disconnect or
'unpair' it.
Note: You can press and hold the Enter button for 3 seconds, to unpair and pair your
connected device.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Outdoor DAB Radio
29
Advertisement
Table of Contents
