Scanning Stations
Press MENU button on the unit, turn SELECT/SNOOZE knob to select Scan, and then press
SELECT/SNOOZE knob to full scan.
Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1.
Press MENU button on the unit, turn SELECT/SNOOZE knob to select Manual tune, and
then press SELECT/SNOOZE knob to confirm, the display will show the channel number and
frequency.
2.
Turn SELECT/SNOOZE knob to select the channel you wanted, and then press
SELECT/SNOOZE knob to confirm. (Visit:
and frequency of DAB stations.)
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds. The new stations will
be added to station list automatically.
3.
To playing the station, first press BACK button repeatedly to exit manual tune.
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button on the unit, turn SELECT/SNOOZE knob to select Prune invalid, and
then press SELECT/SNOOZE knob to confirm.
2. Turn SELECT/SNOOZE knob to select 'YES', and then press SELECT/SNOOZE knob to
confirm removing all invalid stations.
DRC (Dynamic Range Control) value
If you are listening to music with high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range.
1. Press MENU button, turn SELECT/SNOOZE knob to select DRC, and then press
SELECT/SNOOZE knob to confirm.
2. Turn SELECT/SNOOZE knob to select 'DRC high', 'DRC low' or 'DRC off', and then press
SELECT/SNOOZE knob to confirm.
www.digitalradioplus.com.au
→
to learn more channel
23