Change The Mode; Using Headphones - Bush JN-7013 Instruction Manual

Getting to know your Mono DAB/FM Radio
You'll be up and running in no time
6. Set date is displayed and the day will flash. Use the Prev or Next button to scroll and
short press the Select button, to confirm the day, month and year, using the same
method as you used to set the time.
When you confirm the correct date. 'Time Saved' is displayed and the display returns
to <Set Time/Date>.
You can now use the Prev or Next button to scroll and short press the Select button,
as you did to set the time and date to change the settings for:
12/24 hour clock display, the date format, DD-MM-YYYY or MM-DD-YYYY and to auto
update the time from the DAB signal, FM signal, DAB or FM signal or no update.
7. Short press the Menu button to step back through the Menu options and exit the
Menu.

Change the mode

Short press the Power/Mode button to change between DAB and FM modes. Please
check the display, which will confirm the mode.

Using headphones

You can connect headphones with a 3.5mm plug (not included) to your radio. The
headphone socket can be found on the back of the radio at the bottom. When you
have headphones connected the radio speaker is switched off and all sound is via the
headphones.
Note: Always keep the volume within reasonable limits.
18
Getting to know your Mono DAB/FM Radio
This page is left intentionally blank
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your Mono DAB/FM Radio
19